玉环鑫峰环保设备厂

中文  |  English

产品详情

      XF-G旋流式喷漆打磨吸尘一体机,适用于家具制造、石材打磨工艺、洁具打磨,机体采用#304不锈钢、流量16000-25000m3/h的风机、风道、湿式旋流除尘脱水装置,运转稳定,噪音低,能耗少,安全可靠,耐用性强。

 

        粉尘和漆雾在吸风机的作用下,进入水帘涡漩区会自动形成涡漩状气流,由于涡漩状气流使漆尘与水雾的接触表面积大大扩大,并充分高速地相互混合在一起。水雾与漆尘混合后的气流然后进入除雾器、漩柱型气流中的小水珠和漆尘颗粒在离心力的作用下,甩向圆筒周壁成水滴状流入下方的水池,实现漆尘颗粒从废气中的分离,其除尘效率迖到95%以上。 

 

        XF-G Spraying and Grinding Vacuum Cleaner is suitable for collecting dust that is produced by furniture manufacturing, stone polishing, and sanitary polishing. Its body is made of 304 stainless steel, fan (the flow rate of 16000-25000 m3/h), air flow tube, spiral-flow filtering board. The machine is stable, low noise, low power consumption, safe, reliable, durable and strong.

 

       Under the effect of Fan, the dust and painting mist flow into the filter system and spins up. The filter system increase the contact area of water and dust or painting mist, which create high dsorption rate. The mixture of water, painting mist and dust will then flow to the fitler board, and be thrown into the tank under the action of the centrifugal force. The dust and painting mist are separated from the exhaust gas. The dust removal efficiency is more than 95%.

 


 

 

XF-G打磨/喷漆吸尘器

XF-G Grinding Vacuum/Spray Paint Treatment

发送到实时通讯