玉环鑫峰环保设备厂

中文  |  English

产品详情

      XF系列(XF-C、XF-D)打磨吸尘器,适用于家具制造、石材打磨工艺、洁具打磨,机体采用#304不锈钢、流量14500-23000m3/h的风机、德国进口西门子自动感应器、三道过滤层,运转稳定,噪音低,能耗少,安全可靠,耐用性强。

 

       除尘器通过风机吸入含尘空气后,通过第一道过滤层空心球,水雾的作用下,含尘空气中的微细粉尘得到充分湿润,并且相互碰撞、凝聚形成尘水混合物,尘水混合物在喷淋的作用下流至水箱。未完全净化的空气通过蜂窝纸进行水雾过滤后,在机器上方排出,实现对含尘气流的除尘净化。该设备粉尘处理效果高达95%以上。

 

        XF series Gringding Vacuum Cleaner (XF-C,XF-D), is suitable for collecting dust that is produced by furniture manufacturing, stone polishing, and sanitary polishing. Its body is made of 304 stainless steel, fan (the flow rate of 14500-23000 m3/h), automatic sensors (imported from Germany Siemens) and three stage of fitering. The machine is stable, low noise, low power consumption, safe, reliable, durable and strong.


        Firstly the dust absorbed into the collector. Through the first filtering stage (plastic ball/plastic board), the dust in the air can be fully wet under the water spray’s effect . The dust and water colliding with each other and reforming into the dust condensation water mixture, and he mixture is held back and flow to the water tank. The filtered air will be discharged above the machine. The dust treatment effect of the equipment is up to 95%.

 


 

 

 

 

 

 

 


 

 

XF-C/D打磨吸尘器

XF-Grinding Vacuum Cleaner

发送到实时通讯